Semi-rigid, adhesive lined, heat shrink insulating caps specifically designed to insulate, seal and protect end or stub splices under extreme operating conditions.
Semi-rigid, adhesive lined, heat shrink insulating caps specifically designed to insulate, seal and protect end or stub splices under extreme operating conditions.

● 4:1 shrink ratio allows fewer sizes to cover a wide range of profiles
● Seals and protects against water, moisture and chemical
● Adhesive bonds readily to PVC, XLPE and PP-EPDM cable jackets
● Shrinks rapidly for quick installation
● Continuous operating temperature:-45℃-125℃
● Fully shrink temperature: 125℃
● Not flame-retardant
Technical Data
| Property | Test Method | Standard |
| Tensile Strength(MPa) | ASTM D2671 | ≥12 |
| Elongation(%) | ASTM D2671 | ≥200 |
| Tensile Strength after aging (MPa) | Ul224 158℃X168hr | ≥8.4 |
| Elongation after aging(%) | Ul224 158℃X168hr | ≥100 |
| Dieletric strength(kV/mm) | IEC 60243 | ≥15 |
| Volume resistivity(Ω.cm) | IEC 60093 | ≥1X1014 |
| Code | Size (mm) | Standard Length (mm) | Expanded | Recoverd | |||
Inner Diameter Min(mm) | Inner Diameter Max(mm) | outer Lyer Thickness (mm) | Adhesive Thickness (mm) | Total Wall Thickness (mm) | |||
| SBRS-CAPS-NF-1 | 3.2 | 22 | 3.2 | 0.80 | 0.64 | 0.56 | 1.20 |
| SBRS-CAPS-NF-2 | 4.8 | 25.4 | 4.8 | 1.30 | 0.76 | 0.76 | 1.52 |
| SBRS-CAPS-NF-3 | 6.4 | 28.4 | 6.4 | 1.52 | 1.00 | 0.91 | 19.1 |
| SBRS-CAPS-NF-4 | 9.5 | 31.8 | 9.5 | 2.00 | 1.08 | 1.00 | 2.08 |
| SBRS-CAPS-NF-5 | 12.7 | 38.1 | 12.7 | 2.41 | 1.30 | 1.24 | 2.54 |